This is the official Nord Modular Editor v3.03 adapted for Mac OS X. It is embedded in a standalone Wine compiled App. That's why the app size is so large. It contains all the Wine binaries so the app can run without prior install of Wine. It works for both Nord Modular G1 and Nord Micro Modular.

If your Midi setup is stuck to "Still Looking...", it's probably because your Midi Interface is not transmitting fast enough. Try with a different one. Here’s a list of known working MIDI interfaces

Feel free to contact us for any suggestions. HERE

INSTRUCTIONS:

• Download and Unzip the file

• Read the _Read-Me-First.txt and follow the instructions (you’ll need to apply a patch to make it work)

• Launch NordModularEditor.app

• Go to Setup>MIDI

• On Port 1, check 'Enabled' and select the IN and OUT ports that communicate with your
  Nord Modular (must be plugged to PC in and PC out of the Nord Modular)

• Click [OK] to apply

This is the unofficial Nord Virtual Modular V0.01  adapted from the official Nord G2 Demo V1.40 and modified by Joshy for Mac OS X. See topic here: http://electro-music.com/forum/topic-57892.html
 It is embedded in a standalone Wine compiled App. That's why the app size is so big (around 300 MB). It contains all the Wine binaries so the app can run without prior install of Wine. 

If you experience a success or a failure, please take a moment to report which OSX and Midi interface you use by contacting us. Thanks!

Feel free to contact us for any suggestions. HERE

INSTRUCTIONS:

• Download and Unzip the file

• Drag the app into your Application folder

• Launch Nord Virtual Modular.app

• Choose your audio device

• To open patches, go to File>Open then go up to parent directory until you see the Finder Parent folder you are familiar with.

• Enjoy!

If it doesn't work properly, please try with this alternative version: Nord-Virtual-Modular-v0.01-MacOSX-Alt.zip